Accessing Information On Parquet Flooring Refinishing Today
You will be able to replace the shiny nature of the wood. If you are not able to do it yourself, you may consult a professional to do the job for you. However, if you can handle the task on your own, you will understand that this kind of floor in an interesting one to have. The wood planks have been arranged in a pattern that gives out intricacy to the entire finishing.
It could be a bit complicated when redoing the floor. This is because sanding or staining will not work well because of the grain of wood going in all directions. You should keep your focus to replacing the top gloss coating. Deep sanding or staining should be avoided. If you have to deep sand the floor, you ought to use a machine that is able to sand in all directions at once.
Make sure you prepare well. Begin by freeing the floor of any obstructions. Before you attempt to redo it, make sure it is as clean as possible. It could be a great idea to remove the entire furniture from the room before the work begins. In addition, you should remove all the floor trim. This could be done using a hammer and flat bar. Be careful not to crack the trim.
No nails should be left sticking out as they could cause many obstructions. Importantly, clean using warm water and a bit of dishwashing liquid. It is vital never to leave any water standing on the floor as it may result to staining or destroying a good portion of your floor.
You may begin sanding the floors to remove the entire top gloss. Do not sand all the way down to the grain unless you are using an orbital sander. You could find one for rent. This ensures that you get the finest possible results. Make sure you start by using a coarse sandpaper and move on to a finer one when you are done. This ensures that the floor remains smooth. After you are done, remove the dust by vacuuming your floor. What you see should be a dull floor free of any glossiness.
Start applying the polyurethane gloss from the extreme corner of the area. You could also pour it along the wall and pull it over the floor with a Lambswool applicator. Ensure that the coat is smooth, even and thin. It should not form any bubbles. Allow it to dry for a day before applying the second coat.
When it is dry, hand buff the entire floor with very fine sandpaper. This is to ensure that the second coat sticks. Remove the dust and get going with the second coat. Repeat the same method and apply a third and final coat. This should not be sanded. Restore back the trim. After this, you are done with your parquet flooring refinishing.